Spy Shots

Jaguar I-Pace makes transition to production with hardly any changes

View 7 Photos
It looks like Jaguar designer Ian Callum wasn't kidding when he said the I-Pace concept was "a preview of a five-seat production car that will be on the road in 2018." Based on these spy photos, the production I-Pace will look darn near identical to the concept.

The prototype seen above, in a unique and rather groovy green camouflage wrap, retains the swoopy cab-forward design of its concept predecessor. The headlights have the same shape and still sweep back nearly to the front wheel wells, and the door handles are still flush mounted ovals placed low on the doors. At the back, the crisp crease marking the trailing edge of the hatch is intact, as well as the triangular points on the rear spoiler.

There have been a few minor changes here and there. At the front, the grille doesn't have quite as much depth as the concept, and the base of the front bumper doesn't have as aggressive an air dam. The big heat extractor vent in the hood is also gone. The rear bumper has also been rounded off a bit more with a simpler rear diffuser. The side glass is in production form, so now there are seams that show where the glass rolls down. It appears the rear doors will have quite a small glass opening, as the seam is roughly at the half-way point of the window.

If the mechanicals of the concept end up as unchanged as this prototype's exterior, expect the production I-Pace to have a pair of electric motors that will produce 400 horsepower and 516 lb-ft of torque. Jaguar estimates these will propel the car to 60 mph in about 4 seconds. The motors will be supplied with power from a 90 kWh lithium-ion battery, which Jaguar says will provide a range of 220 miles. With a target date of 2018, we would expect to see the production model revealed at the end of 2017 or early in 2018.

Related Video:

Jaguar Information

Share This Photo X