The Enzo had no companion watch, but its successor, the Ferrari LaFerrari, does. Created by Hublot "entirely in parallel with the car" and "alongside the Ferrari teams," the MP-05 LaFerrari tribute watch is a similar test of how much gobsmacking gadgetry can be packed into a chassis. The manually-wound watch has 11 barrels set in a spine down the center that work together to provide a 50-day power reserve. So yes, it does need to be wound, but only once every seven weeks.

Hublot says the movement, engineered in-house, has 637 components. It has more pieces than any other movement Hublot has ever designed, and it gets a tourbillon to further showcase the "demonstration of watchmaking virtuosity." The face is sapphire crystal, the case is black PVD titanium and features an open case-back, the strap is rubber with a PVD titanium buckle. Time is told via the barrels to the right of the the spine on the right – it's 10:05 on the watch above. To the left are the barrels displaying the amount of power remaining.

Hublot hasn't disclosed the price, so you know what that means. There will be 50 tribute watches made, each sent in a presentation case wrapped in Schedoni leather and carbon fibre and including the miniature power tool you need to wind the timepiece. You can read all about it in the press release below, and for true watch geeks there's also an in-depth wrists-on video of the MP-05, performed by

Show full PR text

50-day power reserve: A World Record power reserve for a hand-wound Tourbillon wristwatch.

Movement 100% designed, developed and produced by the Hublot Manufacture engineers and watchmakers

25/04/13 -- We are in the world of the exceptional. The MP-05 "LaFerrari" represents a very special series, entirely designed and developed by the Hublot Manufacture engineers and watchmakers in tribute to "LaFerrari".

In a demonstration and testimony that lives up to the car, it has achieved a historic record with its 50-day power reserve. It is also the watch with the most watchmaking components created to date by Hublot (637).

The watch and the car: The MP-05 "LaFerrari" was developed - in technical and design terms - entirely in parallel with the car, alongside the Ferrari teams. They share a number of common points. Able to boast no fewer than 637 components for the movement, which is also equipped with a Tourbillon, as well as a power reserve of approximately 50 days thanks to its 11 barrels, arranged in a line just like a spinal column and interconnected so that they do not each discharge in turn but support each other, this watch is closer to being a concept watch.

The watch is finely wrought in terms of shape, featuring a complex shaped sapphire crystal clearly reminiscent of the car's outline, as well as an open case-back, and is made from black PVD titanium. It is topped by a titanium and carbon insert in its centre, revealing the winding crown. The time-setting crown is positioned under the case. Both are completely integrated into the design, and therefore practically invisible.

The movement has an original display, featuring first off on the front vertical face the small seconds indicated by means of an aluminium cylinder fastened onto the suspended Tourbillon cage (significantly bigger than usual with a cage diameter of 14.50 mm, for even better appreciation of the mechanical parts).

The hour and minute are displayed to the right of the barrels, also indicated by means of one anodised black aluminium cylinder each. On their left is the cylinder indicating the power reserve. Reinforcing bars either side, made from anodised red aluminium, bring to mind Ferrari's red signature.

A small detail, but one which makes reading the time easier; on each cylinder the size of the numerals has been maximised with white SuperLuminova™, to enhance the display for ease of reading. This is all rounded off by a rubber strap with a special folding buckle in black PVD titanium.

The desire for a truly exceptional watch has been extended to the design of the presentation case, made from schedoni leather and carbon fibre, containing the specific tools for winding the watch, and whose design was also inspired by the world of motoring. Limited edition of 50 numbered pieces.

Reference 905.ND.0001.RX
Series 50 numbered pieces
Case Black PVD made of titanium
Functions Hour and minute indicated by anodised black aluminium cylinders
SuperLuminova™ markings
Power reserve indicated by an anodised black aluminium cylinder
SuperLuminova™ markings
Seconds indicated by an anodised black aluminium cylinder
SuperLuminova™ markings
Suspended vertical Tourbillon
Ergonomic time-setting system under the case middle (wrist side)
Invisible manual winding
11 series-coupled barrels

Movement dimensions: Ø 45.8 x 39.5 mm
Thickness 15.30 mm
Tourbillon cage diameter Ø 14.50 mm
Number of jewels 108
Number of components 637
Frequency 21,600 Vib/h (3 Hz)
Power reserve 50 days

I'm reporting this comment as:

Reported comments and users are reviewed by Autoblog staff 24 hours a day, seven days a week to determine whether they violate Community Guideline. Accounts are penalized for Community Guidelines violations and serious or repeated violations can lead to account termination.

    • 1 Second Ago
      • 2 Years Ago
      Looks like a something Batman would have on his wrist, i bet it cost more than the car.
        • 2 Years Ago
        $300,000, according to the video. Not how I'd spend my money, but obviously I'm not the target market.
      • 2 Years Ago
      I'd like to see the video of the watch movements.
      Hajime1990 #follow
      • 2 Years Ago
      This really looks like what Bernie would love. Ugly. Period.
      • 2 Years Ago
      would look great with my puma ferrari jumpsuit and sneakers
      • 2 Years Ago
      So it's ugly, tasteless, intentionally overly complicated for the sake of being complicated, AND expensive as ****? I wish I could buy them all, just so I could line them up and drive over them with a Camry.
      • 2 Years Ago
      No thanks. I don't think people want to look like dorks.
      Jonathan Wayne
      • 2 Years Ago
      I have a large watch collection and I would never buy this. Hideous and I am assuming massively overpriced. For the right price it would be interesting to have in a collection though, I would just never wear it.
      Riot Sloth
      • 2 Years Ago
      A ghastly watch by a comedy jewellery maker. What next, a Jacob and co sapphire encrusted watch which plays a wav of a car revving on the hour?
      • 2 Years Ago
      Proof that high price does not always equate to good taste. That's just ridiculous.
      • 2 Years Ago
      As a mechanical engineer, I can appreciate the work that went into this watch's design and construction. However, as an engineer, I realize it's a bit silly when a $50 atomic watch can keep much better time. A watch that uses a complicated design to end up keeping time less accurately than an inexpensive watch can be cool to look at, but "rube goldberg" come to mine. You have to think of things like this as art or jewelry.
        Billy Devine
        • 2 Years Ago
        An atomic watch gets its time from something outside itself therefor you cant compare the time the watch itself keeps. BTW there is no perfect human/computer made clock/watch in the world, which is why all our time is updated from the Royal Observatory in Greenwich, London. You are completely missing the point of a mechanical watch with your above statement.
        • 2 Years Ago
        So is getting a million dollar car that can get you from point A to B no different a Honda Civic, or public transportation.
      • 2 Years Ago
      Pretty amazing in terms of the mechanics.....but that's one ugly ass watch to actually have to wear. I'll stick with my Speedmaster, thanks.
      • 2 Years Ago
      Shut up and appreciate the engineering, hard work and craftsmen ship that went into building this
    • Load More Comments
    Share This Photo X