Lamborghini Aventador rolling chassis – Click above for high-res image gallery
The 2011 JEC Composite Show is currently taking place in Paris, and if we were there, our eyes would be treated to the naked beauty that is the Lamborghini Aventador's rolling chassis.
Lamborghini's Aventador LP700-4's chassis is a perfect fit for the JEC show, as it's constructed with a reinforced carbon fiber composite. The composite material was developed by Lamborghini, working in conjunction with engineers at Boeing. Composite materials are also used in the construction of the wheels, frame, seats and a handful of other Aventador parts. Follow the jump for the full press release.
Live photos copyright ©2011 Drew Phillips / AOL
[Source: Lamborghini]
Automobili Lamborghini at the 2011 JEC Composite Show in Paris
Automobili Lamborghini's participation in the 2011 edition of the JEC Composite Show in Paris - one of the world's most important exhibitions of composite materials - is intended to emphasize the company's leadership in this highly specialized sector, not only in applying these materials in mass production (as shown by the new Aventador LP 700-4), but also in the investigation and development of new manufacturing technologies and the resulting product spin-offs.
The use of composite materials reinforced with carbon fiber is becoming increasingly widespread in the automotive sector, as revealed by a study by Lucintel that foresees a growth of 65% over the next 5 years. Many manufacturers are working on developing and applying these technologies so they can build lighter vehicles that make an important contribution to reducing fuel consumption and air pollution, through improvements that include increasing the strength of the vehicle's structures.
Automobili Lamborghini's extensive experience with using composite materials reinforced with carbon fiber in the super sports car sector is demonstrated by the Sesto Elemento concept car, where these materials have resulted in maximum stiffness with minimum weight. During the presentation of the vehicle at the exhibition, Luciano De Oto, the Chief of the Lamborghini Advanced Composite Research Center (ACRC), noted that the complete vehicle weighs only 999 Kg, as compared with the 1410 Kg of a Gallardo.
The widespread use of CFRP (various types of which were used to build the wheel rims, frame, bodywork with roof, seats, exhaust and suspension elements of the Sesto Elemento) has enabled structures of extreme technical sophistication and quality to be created, with consequent improvement of the power-to-weight ratio for greater driving pleasure, lower fuel consumption and reduced CO2 emissions.
At its Advanced Composite Research Center (ACRC, a section of the Automobili Lamborghini Research & Development department directed by Maurizio Reggiani), the Sant'Agata Bolognese-based company is working on what technicians describe as "the new frontier" in materials reinforced with carbon fiber. The company already offers a host of applications for CFRPs, with particular focus on components that can be built without the need of an autoclave.
A prime example is forged composite, which adds new prerogatives to the more traditional processes in the autoclave. During his presentation at the JEC session devoted to the automotive sector, Mr. De Oto explained that the most significant development in this regard is a "hybrid" combination employing long, unidirectional carbon fiber. What's more, ACRC research and development activities aim at obtaining from forged composite, through its pairing with finishing materials during the molding process, components that meet Class A appearance specifications.
Because they are easy to manufacture and cost relatively little, these new types of finished elements are certain to extend applications of CFRP into other sectors such as the marine, furnishings, sporting equipment and leisure vehicles segments.
As a matter of fact, ACRC has already cooperated with third parties and supplied composite finished elements to companies belonging to a broad gamut of sectors.
Automobili Lamborghini's participation in the 2011 edition of the JEC Composite Show in Paris - one of the world's most important exhibitions of composite materials - is intended to emphasize the company's leadership in this highly specialized sector, not only in applying these materials in mass production (as shown by the new Aventador LP 700-4), but also in the investigation and development of new manufacturing technologies and the resulting product spin-offs.
The use of composite materials reinforced with carbon fiber is becoming increasingly widespread in the automotive sector, as revealed by a study by Lucintel that foresees a growth of 65% over the next 5 years. Many manufacturers are working on developing and applying these technologies so they can build lighter vehicles that make an important contribution to reducing fuel consumption and air pollution, through improvements that include increasing the strength of the vehicle's structures.
Automobili Lamborghini's extensive experience with using composite materials reinforced with carbon fiber in the super sports car sector is demonstrated by the Sesto Elemento concept car, where these materials have resulted in maximum stiffness with minimum weight. During the presentation of the vehicle at the exhibition, Luciano De Oto, the Chief of the Lamborghini Advanced Composite Research Center (ACRC), noted that the complete vehicle weighs only 999 Kg, as compared with the 1410 Kg of a Gallardo.
The widespread use of CFRP (various types of which were used to build the wheel rims, frame, bodywork with roof, seats, exhaust and suspension elements of the Sesto Elemento) has enabled structures of extreme technical sophistication and quality to be created, with consequent improvement of the power-to-weight ratio for greater driving pleasure, lower fuel consumption and reduced CO2 emissions.
At its Advanced Composite Research Center (ACRC, a section of the Automobili Lamborghini Research & Development department directed by Maurizio Reggiani), the Sant'Agata Bolognese-based company is working on what technicians describe as "the new frontier" in materials reinforced with carbon fiber. The company already offers a host of applications for CFRPs, with particular focus on components that can be built without the need of an autoclave.
A prime example is forged composite, which adds new prerogatives to the more traditional processes in the autoclave. During his presentation at the JEC session devoted to the automotive sector, Mr. De Oto explained that the most significant development in this regard is a "hybrid" combination employing long, unidirectional carbon fiber. What's more, ACRC research and development activities aim at obtaining from forged composite, through its pairing with finishing materials during the molding process, components that meet Class A appearance specifications.
Because they are easy to manufacture and cost relatively little, these new types of finished elements are certain to extend applications of CFRP into other sectors such as the marine, furnishings, sporting equipment and leisure vehicles segments.
As a matter of fact, ACRC has already cooperated with third parties and supplied composite finished elements to companies belonging to a broad gamut of sectors.
Sign in to post
Please sign in to leave a comment.
Continue