The Ultra Chair was first unveiled at the Milan Furniture Fair earlier this year as a prototype, and designers used the input of more than 1,500 people to help fine-tune the level of comfort. We're not sure how comfortable it would be sitting in a carbon fiber chair, but it sure does look cool. From Milan to Miami, the chair dropped 2.2 pounds in weight now weighing in at just under five pounds. Designers Clemens Weisshaar and Reed Kram are responsible for envisioning the chair, and both have art pieces that can be seen at the Museum of Modern Art in New York and the Centre Pompidou in Paris.
As a part of the Ultra Chair, Audi's Design Miami booth will also feature an R18 car, various Ultra Chair prototypes and, for some seemingly random reason, a robot used to build cars.
Scroll down to read more about the chair, Audi's involvement in Design Miami and the designers.
-R 18 Ultra Chair designed by Clemens Weisshaar and Reed Kram was developed with Audi engineers
-More than 1,500 testers involved in the development process
-2.2 kilogram chair is on show at Design Miami/ from December 5 to 9, 2012
The R18 Ultra Chair set to be exhibited by Audi at Design Miami/ was masterminded by Clemens Weisshaar and Reed Kram, who represent a new generation of digital designers. The prototype was developed in cooperation with the Audi Lightweight Construction Center and made its very first appearance at the Milan Furniture Fair in April. The chair was fine-tuned using data obtained from an interactive installation that was trialed by over 1,500 testers, plus the know-how of Audi lightweight engineers. The result is sturdier, more comfortable and one kilogram (2.20 lbs) lighter.
Within the auto industry, Audi is seen as an innovative driver of lightweight construction technology, and is dedicated to ensuring the efficient and sustainable use of resources and materials. Designers Clemens Weisshaar and Reed Kram remained true to these policies during the development of the R18 Ultra Chair, which is made from carbon fiber, carbon and high-strength sheet aluminum. In cooperation with the lightweight specialists at Audi, they pushed the materials to their limits. Their goal was to achieve maximum stability and comfort with minimum consumption of materials and as low a weight as possible.
Form follows future
With these aims in mind, a prototype of the chair was fitted with sensors and displayed at the Milan Furniture Fair in April 2012. Some 1,500 testers took the chance to trial the prototype in an interactive installation that emitted electronic signals in order to collect data. This technology is employed elsewhere in test labs at Audi for developing racing cars. "The technology was used for an item of furniture for the first time and allowed us to depict the forces at play in the chair", explained designer Clemens Weisshaar. Based on the chair's structural data, the designers were then able to optimize the prototype in collaboration with the engineers at the Audi Lightweight Construction Center. The various materials were employed at those locations that best suited their properties. The resulting chair tips the scales at just 2.2 kilograms (4.85 lbs) and embodies the principle behind Audi ultra: removing even the smallest amount of superfluous material by selecting materials intelligently and optimizing the components used. "This efficiency is the focus of our ultra lightweight construction principle", confirmed Dr. Karl Durst, an engineer in fiber-reinforced composites at the Audi Lightweight Construction Center. Durst was involved in the project: "We combine the strengths of the materials in such a way that their weaknesses are no longer important", he clarified.
As light as possible, as heavy as necessary
The final R18 Ultra Chair will be exhibited at Design Miami/ from December 5 to 9. During the show, the designers will host a special presentation to give visitors an insight into their work on the chair. On display will be sketches, material samples, models and prototypes from various stages of the development process as well as a robot used in the auto industry. A highlight will be the chair's namesake, the R18 ultra racing car, which competed for Audi in the 24 Hours of Le Mans this year.
Design Miami/ is the most influential international design forum. The fair, which is paired with Art Basel – events are held in the USA in December and in Basel in June – has become the top meeting place for collectors, exhibitors and creative minds who engage with collectible design.
Clemens Weisshaar and Reed Kram have been referred to as "the vanguard of the next generation of digital designers" (FORM magazine) and "the poster boys of a new breed of designers" (International Herald Tribune). Clemens Weisshaar and Reed Kram's works can be found in the permanent collections of the Museum of Modern Art, New York and the Centre Pompidou, Paris. The R18 ULTRA CHAIR is their second project for Audi after the widely acclaimed, award-winning installation OUTRACE on London's Trafalgar Square in 2010.
Audi has been the exclusive automotive partner to Design Miami/ since 2006 and has a sense of obligation to design and technology in equal measure. In recent years, the carmaker has commissioned installations by international designers and architects such as Tom Dixon, Moritz Waldemeyer, Mirko Borsche and Bjarke Ingels. In so doing, the brand with the four rings continues to underline its commitment to promoting design culture and research.