B1930 code definition

The B1930 trouble code indicates that a shorted circuit has been detected in relation to the airbag deployment system's safing sensor.

What the B1930 code means

The B1930 trouble code is intended as a failsafe to keep the crash sensor from deploying the airbag without due cause. A shorted circuit for the safing sensor occurs when the circuit is flooded with too much energy. The resulting damage will disable the safing sensor and trigger a stored code in the vehicle's onboard computer.

What causes the B1930 code?

Faulty or damaged electrical wiring is the most common cause of a B1930 trouble code. The safing sensor charging system may be overworking itself. A faulty safing sensor is another possible cause of a B1930 code.

What are the symptoms of the B1930 code?

A malfunctioning safing sensor will disable activation of the airbag. However, if short circuit problems are affecting the vehicle’s airbag system as well, the lack of a safing sensor failsafe may result in a deployed airbag. A stored trouble code and illuminated engine lamp will also accompany a B1930 trouble code as diagnostic indicators.

How does a mechanic diagnose the B1930 code?

A B1930 code may be first verified by testing the vehicle with an ODB-II code reader. All wiring relating to the safing sensor and airbag deployment system should be checked out for potential signs of damage, including (but not limited to) corrosion, disconnection, misplacement and faultiness. If the wiring checks out properly, the safing sensor itself should be looked over for potential signs it may be malfunctioning.

Common mistakes when diagnosing the B1930 code

Body-related trouble codes can refer to different things depending on the model of vehicle. It is important to verify that this particular code description pertains to your vehicle. Refer to the vehicle manual if you are unsure.

How serious is the B1930 code?

A B1930 trouble code will typically disable the airbag deployment system, as a working safing sensor is necessary to activate it. Although this will not affect the vehicle's drivability, it may host a safety concern in the event of a crash. Should you choose to drive a vehicle with a disabled airbag deployment system, make sure to use other safety features, such as a seatbelt.

What repairs can fix the B1930 code?

Replace any fried electrical wiring and mend any poor connections in the circuit as needed. If the safing sensor or other components related to the circuit have been damaged, they should be repaired or replaced accordingly. If the charging system overpowered the circuit as a result of a fault, it should be replaced. After all repairs have been completed, retest the vehicle to see if the trouble code recurs. This will indicate whether or not the repairs have proved successful.

Additional comments for consideration regarding the B1930 code

In most cases, the safing sensor can be found behind the kick panel on the passenger’s side of the vehicle. The safing sensor is located on the passenger’s side in order to make it more susceptible to the force of a crash impact.

Need help with a B1930 code?

YourMechanic offers certified mobile mechanics who will come to your home or office to diagnose and repair your vehicle. Get a quote and book an appointment online or speak to a service advisor at 1-800-701-6230.

This article originally appeared on YourMechanic.com as B1930 OBD-II Trouble Code: Air Bag Safing Sensor Output Circuit Short To Ground and was authored by Conor Fynes.


Share This Photo X