2016 BMW 435i ZHP Edition Coupe
  •     
  • Image Credit: BMW
BMW 435i ZHP front 3/4 sunset
  • Image Credit: BMW
BMW 435i ZHP grille
  • Image Credit: BMW
BMW 435i ZHP Edition spoiler
  • Image Credit: BMW
BMW 435i ZHP front splitter
  • Image Credit: BMW
Performance enthusiasts enamored of the BMW 4 Series but not quite ready to step up to the M4 will be excited at the arrival of the new ZHP edition. Reviving a code last seen on a package for the E46 series a decade ago, the 2016 BMW 435i ZHP Edition boasts a series of performance upgrades aimed not only at "improved optics and aerodynamics; it is also notably quicker with more precise handling."

The special 4 Series packs a series of BMW M Performance accessories to give it a more aggressive attitude, including a new Track Handling Package, M Sport Package, limited slip differential and a range of M Performance parts. The Track Handling Package alone includes 18-inch alloys, M Sport Brakes with four-piston calipers up front and two pistons in the back and incorporates the Active M Suspension with variable dampers and steering.

With revised software and a new air intake, the M Performance Engine Kit kicks in an extra 35 horsepower for a total of 335 hp and either 32 more pound-feet (with the automatic transmission) for a total of 332 lb-ft or a 17-lb-ft boost (with the manual) for a total of 317 lb-ft. That's enough to drop 0.2 seconds off the 435i's 0-60 time and 0.5 seconds off the run from 50 miles per hour to 75.

BMW also promises better accelerator response and engine note. There's a sport exhaust that sheds 8.8 pounds of weight, a full carbon-fiber aero kit and visual enhancements inside, out and under the hood. The German automaker will only be offering 100 examples of the enhanced coupe starting in July, with pricing to be announced closer to the launch date.

UPDATE: Of course, if you miss out on one of these special editions, you can always spec out your own from the M catalog with parts installed at BMW's Vehicle Distribution Center. And, as BMW points out in correspondence with Autoblog, you could even order one up with all-wheel drive and in convertible or four-door Gran Coupe body-styles if that's more your pace.

Related Video:

2015 BMW M4 Convertible top goes down automatically | Autoblog Short Cuts
Show full PR text
BMW UNVEILS THE SPECIAL EDITION BMW 435i ZHP COUPE

Woodcliff Lake, NJ – May 19, 2015... Paying tribute to the iconic ZHP Performance Package, BMW today released details for a 2016 BMW 435i ZHP Coupe Edition. The original ZHP option code was created by BMW Individual as a performance package for the 2003-2006 E46 3 Series that included the M-Tech II body kit, a ZHP shifter knob and shifter, upgraded suspension parts and settings, a different DME and special cam shafts that raised power output to 235 hp and allowed for a higher redline. Fulfilling the desires of true enthusiasts, the package was soon referred to by its internal option package code 'ZHP'. BMW of North America embraced the thirst for the unique BMW 435i ZHP Coupe Edition once more resulting in the unique collaboration between factory options and key elements from the exciting BMW M Performance Accessory catalogue. Only 100 of these very special cars will be offered.

The new BMW 435i ZHP Coupe Edition is not just a vehicle with improved optics and aerodynamics; it is also notably quicker with more precise handling. These components take the vehicle's capabilities to levels that those familiar with BMW's racing heritage can appreciate. The BMW M Performance line of accessories provides a distinctive, sporty character to further enhance driving dynamics and is the result of years of racing expertise and has been developed in close collaboration with BMW M GmbH. Each component goes through an intensive development and manufacturing process resulting in uncompromised performance. Exclusive chassis, aerodynamic, cockpit and powertrain components are found throughout the BMW 435i ZHP Coupe Edition. Key characteristics are:

- Track Handling Package, new for MY16
- BMW M Performance Limited Slip Differential (LSD)
- BMW M Performance Parts
- M Sport Package

Track Handling Package

Designed to increase the dynamic capabilities of the already agile BMW 435i, the Track Handling Package adds 18" Orbit Grey V-Spoke Wheels and M Sport Brakes with 4 piston fixed front and 2 piston fixed rear calipers adding to the vehicles thirst and drivers demand for speed and acceleration. Moreover, this package incorporates the Adaptive M Suspension with variable damper technology as well as Variable Sport Steering.

BMW M Performance Limited Slip Differential

Designed and created for BMW enthusiasts, the mechanical Limited Slip Differential provides the extra performance advantage that true performance drivers desire. This differential utilizes 3 clutch plates for a total of 30% lockup on acceleration and 9% lockup on deceleration. This lockup provides instant power to the wheel that has the greatest amount of grip to gain better traction out of tight corners. An additional benefit in low-grip situations is that both wheels get equal torque, meaning more forward driving force on roads with reduced traction. The M Performance limited slip differential optimizes the traction, and ensures more controlled and precise driving behavior at the vehicles limits of adhesion. The M Performance LSD is a true advantage while at the track or in sporty driving situations.

- The advantage can be felt at the track and in everyday driving. The improved vehicle dynamics are clearly present with the LSD as more torque can be transferred to the road at any given time, allowing for quicker acceleration out of corners.
- Traction is improved for any type of road condition.
- The LSD integrates seamlessly with the vehicles' DSC system.

BMW M Performance Engine Kit (+35 hp, up to +32 lb-ft)

The BMW 435i ZHP Edition gets an exhilarating boost in performance thanks to the new M Performance Power Kit enabling an unprecedented level of acceleration and speed. The BMW M Performance Power Kit features engine tuning software and a new

M Performance Engine Air Intake system. In addition, a replacement M Performance Engine Cover and Rocker Panel Decals provide visual distinction this special edition vehicle deserves. Power and torque figures are now updated as follows:

- Horsepower increased to 335hp (35hp gain).
- Torque is increased to 332 lb-ft (automatic transmission, 32 ft/lb gain) and 317 lb-ft (manual transmission, 17 ft/lb gain).
- Improved acceleration that drivers can feel immediately when compared to a standard 435i:
-- 0.2 seconds faster than the standard 435i model from 0 mph to 60 mph.
-- 0.5 seconds faster than the standard 435i model from 50 mph to 75 mph.
- More dynamic accelerator pedal calibration in Comfort, Sport and Sport + Modes, provides an even quicker engine response.
- Exhaust "burble" sound during engine overrun conditions. The M Performance Power Kit ensures an optimized engine and exhaust system sound. The exhaust "burble" is enabled in Comfort mode and amplified even further in Sport mode. As a result, the car sound amplifies 'performance'.
- Sport Display now shows increased power figures (400 hp and 400 lb-ft) to reflect increased performance.
- The M Performance Rocker Panel Decals give the car a sportier look, even from the outside, providing a hint of the car's hidden performance.

BMW M Performance Exhaust

The stainless-steel M performance Exhaust sheds 8.8 pounds of weight while also reducing backpressure for improved dynamic performance, producing a sound that is perfectly balanced for performance and comfort. Two stainless steel tips with a brushed finish connect to a muffler with a straight-through design.

BMW M Performance Aerodynamics Package

The BMW 435i ZHP Edition is also enhanced by the addition of the M Performance Aerodynamics Package. This package underlines the sporting appearance of this special edition vehicle. It comprises of the following components: A front and rear spoiler made from high-quality carbon, as well as a rear diffuser made from PUR-RIM a specially crafted high quality polymer. The dynamic elegance of the M Performance Aerodynamics package amplifies the vehicles exemplary sportiness even further. Above all it offers optimized aerodynamics and accentuates the car's sporty driving behavior.

- Made entirely from carbon fiber reinforced plastic (CFRP), the design of the front M Performance Front Carbon Fiber Splitter and rear M Performance Carbon Fiber Spoiler give the BMW 435i ZHP Edition a powerful appearance.
- 3 striking, embossed bars are integrated into the design of the rear M Performance Diffuser. Their pointed appearance accentuates the car's sporty character.
- The integrated expanded grille in the rear diffuser painted in matte black produces an additional motorsport feel.
- M Performance Black Kidney Grilles round off this striking BMW M Performance Aerodynamic Package.

M Sport Package

The BMW 435i ZHP Edition incorporates the M Sport Package comprised of the front and rear Aerodynamic kit, Aluminum Hexagon Trim with a Black high-gloss accent and an M Sport steering wheel.

Only 100 BMW 435i ZHP Editions will be produced making it an exclusive option for customers in search for something truly special. Available with either a Sport Automatic 8 speed or a 6 speed Manual Transmission, the customer can choose to drive either an Alpine White or Black Sapphire Metallic BMW 435i ZHP Edition.

The ZHP will be available through selected BMW M Centers with production starting in July.

Pricing on the new BMW 435i ZHP Edition will be announced closer to the on-sale date.

BMW of North America is also able to offer many of these BMW M Performance Parts individually through a program called VIA (Vehicle Distribution Center Installed Accessory).

VIA allows buyers of new BMW or MINI vehicles to add cosmetic and performance accessories to their factory order and have them installed at the port before dealer delivery. These accessories are then fully warranted as part of the New Car Warranty, residualized in a lease or amortized into a loan, incorporating the value of accessories into the actual MSRP.

BMW Group In America

BMW of North America, LLC has been present in the United States since 1975. Rolls-Royce Motor Cars NA, LLC began distributing vehicles in 2003. The BMW Group in the United States has grown to include marketing, sales, and financial service organizations for the BMW brand of motor vehicles, including motorcycles, the MINI brand, and the Rolls-Royce brand of Motor Cars; DesignworksUSA, a strategic design consultancy in California; a technology office in Silicon Valley and various other operations throughout the country. BMW Manufacturing Co., LLC in South Carolina is part of BMW Group's global manufacturing network and is the exclusive manufacturing plant for all X5 and X3 Sports Activity Vehicles and X6 and X4 Sports Activity Coupes. The BMW Group sales organization is represented in the U.S. through networks of 338 BMW passenger car and BMW Sports Activity Vehicle centers, 140 BMW motorcycle retailers, 122 MINI passenger car dealers, and 35 Rolls-Royce Motor Car dealers. BMW (US) Holding Corp., the BMW Group's sales headquarters for North America, is located in Woodcliff Lake, New Jersey.

Share This Photo X