Autoblog

LA 2009: Dodge Viper enters final year with tweaks and first two limited-edition models

Michael Harley — Wed, 02 Dec 2009 12:48:00 EST

Filed under: LA Auto Show, Convertible, Coupe, Performance, Dodge

2010 Dodge Viper ACR 1:33 Edition - Click above for high-res image gallery

The 2010 model year marks the last run of the 600-hp Dodge Viper. To keep performance (and consumer interest) high for the next 12 months, the automaker is adding new colors, enhancing performance and releasing several limited-edition models.

Standard Viper SRT10 models receive two new exterior colors: Toxic Orange Pearl Coat and Bright Silver Metallic Clear Coat. A new shorter fifth gear ratio (changing from .74 to .80) improves high speed acceleration (the 0-200 mph run drops by 14 seconds). The track-bred ACR models get a new short-throw shifter, and new aerodynamic tweaks to the rear wing lower drag while improving downforce (top speed bumps up to 184 mph on the ACR model).

As of today, the automaker has announced the first two special variants of the Viper, and they promise more will come. The Dodge Viper ACR 1:33 Edition, paying tribute to the record-setting run at Laguna Seca, is identified by its unique two-tone Black Clear Coat/Red Clear Coat exterior color (the opposite of the original Viper ACR color). Other cosmetic enhancements include piano black console bezels with red gauge highlights and red stitching on the seats. The Vooodoo-edition Viper ACR gets an all Black Clear Coat exterior with a Graphite stripe outlined in red. Talk about exclusivity - only 10 cars will be produced with the unique striping on both the exterior and steering wheel. You can check out both limited edition models in our live gallery below and read Dodge's press release after the jump.

Gallery: LA 2009: 2010 Dodge Viper SRT10

Gallery: 2010 Dodge Viper SRT10

[Source: Dodge]

Continue reading LA 2009: Dodge Viper enters final year with tweaks and first two limited-edition models

LA 2009: Dodge Viper enters final year with tweaks and first two limited-edition models originally appeared on Autoblog on Wed, 02 Dec 2009 12:48:00 EST. Please see our terms for use of feeds.

Permalink | Email this | Comments

VIDEO: Inside the cockpit of the Viper ACR's record lap at Laguna Seca

Noah Joseph — Wed, 25 Nov 2009 18:44:00 EST

Filed under: Performance, Videos, Dodge

Dodge Viper ACR laps Laguna Seca - Click above to watch the video after the jump

Pushing a performance monster like the Viper ACR around a race track at ten tenths takes some pretty massive cojones. But few tracks require the testicular fortitude of Laguna Seca.

The iconic circuit in Northern California is packed full of decreasing radius corners, off-camber turns, and the indomitable corkscrew. Fortunately, Dodge test driver Chris Winkler was up to the task, and pushed the ACR around dry lagoon to a record-breaking lap time of 1:33.944, edging out its cousin the Devon GTX in the process to claim the fastest road-car lap time around the track.

Now we've got footage that takes us inside the cockpit for the record run, which may seem like old hat to the video game crowd, until you realize this was happening in real life. Follow the jump to check it out.

[Source: Chrysler via YouTube]

Continue reading VIDEO: Inside the cockpit of the Viper ACR's record lap at Laguna Seca

VIDEO: Inside the cockpit of the Viper ACR's record lap at Laguna Seca originally appeared on Autoblog on Wed, 25 Nov 2009 18:44:00 EST. Please see our terms for use of feeds.

Permalink | Email this | Comments

REPORT: Ralph Gilles puts the brakes on Viper-Ferrari collaboration rumors

Noah Joseph — Wed, 25 Nov 2009 13:44:00 EST

Filed under: Coupe, Performance, Dodge, Ferrari

2008 Dodge Viper ACR - Click above for high-res image gallery

After setting a new lap record at Laguna Seca the other day, Dodge announced some minor revisions to the all-conquering Viper ACR for the 2010 model year. The snake that swallowed the famed 11-turn race track whole will be treated to some revised gearing and aerodynamics, a new short-throw shifter, the addition of a new color to the catalog and an updated interior to boot. There'll also be a special edition ACR to commemorate the record-breaking lap time. But in the process, a senior Chrysler executive clarified some rumors that have been circulating regarding the next generation Dodge supercar.

Back in August we reported that the next-gen Viper could get a heart transplant in the form of a Ferrari-developed modular engine. The program spearheaded by Chrysler's new corporate cousin in Maranello was tipped to form the basis for new engines that would find their way into the bays of upcoming Maseratis, Ferraris and Vipers. But in speaking with AutoWeek, Dodge brand chief Ralph Gilles reportedly put the brakes on the rampant speculation, saying that any collaboration between Dodge and Ferrari on the Viper's replacement wouldn't extend beyond some input from the Italian marque on the car's development. And while that doesn't necessarily mean the engine programs couldn't be merged, "Ferrari is Ferrari, according to Gilles, and "Viper is Viper".

[Source: AutoWeek]

REPORT: Ralph Gilles puts the brakes on Viper-Ferrari collaboration rumors originally appeared on Autoblog on Wed, 25 Nov 2009 13:44:00 EST. Please see our terms for use of feeds.

Permalink | Email this | Comments

VIDEO: 2010 Dodge Viper ACR makes the rounds at Laguna Seca, sets track record

Jonny Lieberman — Tue, 24 Nov 2009 16:26:00 EST

Filed under: Coupe, Performance, Videos, Dodge

2010 Dodge Viper ACR - Click above to watch the video

The Dodge Viper is many things to many people. An object of unparalleled lust to some, a big-mouthed, truck-engined Corvette ripoff to others. And an ankle burner to still others. But no one ever thought of Dodge's V10 quarter-mile thug as a serious track car. Until the Viper ACR showed up.

Lighter (especially in Hardcore Package guise) and producing ten times as much downforce as the "regular" SRT10 Viper, the ACR model set off some pretty big waves when the big-winged snake debuted (especially in the Nurburgring record community), even though most of the rippling came from the street-legal slicks. But never mind all that, the new 2010 Dodge Viper ACR is here, and it's even better than the 2009 version.

Why? Well, it's faster (top speed is now 202 mph) and quicker (it can reach said top speed a whole 14 seconds sooner than the 2009 model). How? Gearing, specifically 5th gear, which has been revised from 0.741 to 0.796. Also, the end caps on the giant wing have been revised, resulting in that higher top end. Some new colors, too. We have tons of videos of it rumbling/blasting around Laguna Seca for your perusal, after the jump. Hat tip to Ryan!

UPDATE: Looks like Dodge, the Viper ACR and driver Chris Winkler just broke the Laguna Seca single-lap record with a time of 1:33.944. Those of you with longish memories will remember that a Devon GTX (powered by a Viper motor) recently set the (now) old record at Laguna -- 1.35.075. In other words, the new Viper ACR just beat the previous record by more than a second. Impressive. And yet another video, after the jump.

UPDATE 2: Gallery of images from the 2010 Dodge Viper ACR's day at the track added.

UPDATE 3: Chrysler just twittered: "To honor Viper's record-breaking lap at Laguna Seca, Dodge will rollout a Laguna Seca Special Edition Viper." Now that's planning product on your feet!

Gallery: 2010 Dodge Viper ACR at Laguna Seca

[Source: Red Letter Dodge]

Continue reading VIDEO: 2010 Dodge Viper ACR makes the rounds at Laguna Seca, sets track record

VIDEO: 2010 Dodge Viper ACR makes the rounds at Laguna Seca, sets track record originally appeared on Autoblog on Tue, 24 Nov 2009 16:26:00 EST. Please see our terms for use of feeds.

Permalink | Email this | Comments

Autoblog Podcast #152 - Paukert enhanced!

Dan Roth — Tue, 10 Nov 2009 18:15:00 EST

Filed under: Podcasts, Etc., Plants/Manufacturing, Cadillac, Chrysler, Dodge, Ford, Mercedes-Benz, Toyota, Rumormill

Click above for the Autoblog Podcast in iTunes, RSS or listen now!

The usual suspects of Chris, Sam, and Dan are joined this week by Autoblog Editor Extraordinaire Chris Paukert. It's a packed 'cast, starting with the apparent go-ahead of the Cadillac Converj. The future of the Dodge Viper figures in to a few minutes of debate, as does Chrysler's marathon presentation about the company's plans going forward. Moving from Chrysler to the company's former overlords at Daimler, we talk about Mr. Paukert's Wild Ride in the AMG SLS, and take a complete left turn into Ford Ranger land and talk about the one we won't be getting. Toyota's floor mat/throttle controversy finishes up the topics before we take a couple questions and call it a night. A good, solid hour and a half for your enjoyment.

Let us know what you think by dropping us an email at Podcast at Autoblog dot com, reviewing the show in iTunes, filling out our survey, or even leaving us a voicemail on our Google Voice line 734-288-8POD (734-288-8763). Thanks for listening, we'll see you next week!

Gallery: Podcast listener pictures

Continue reading Autoblog Podcast #152 - Paukert enhanced!

Autoblog Podcast #152 - Paukert enhanced! originally appeared on Autoblog on Tue, 10 Nov 2009 18:15:00 EST. Please see our terms for use of feeds.

Read | Permalink | Email this | Comments

Turn the Dodge Viper logo upside down and guess who appears...

Jonathon Ramsey — Mon, 09 Nov 2009 18:38:00 EST

Filed under: Convertible, Coupe, Performance, Etc., Dodge, Humor

Stonehenge, Rosebud, The Wizard of Oz and Pink Floyd - all have confounded us with their hidden meanings. And to that list we now add the logo for the Dodge Viper. Somehow it has eluded us for years that, when turned upside down, the Viper logo turns into what appears to be... Daffy Duck. Or, as some other folks have mentioned, perhaps it's Duck Dodgers, or Darkwing Duck. Someone else thought it was "a gator with a volcano in the background," but we have no idea how that happened...

Regardless of which name that foul goes by, it's quite a revelation to make this late into the Viper game. If there were any meaning intended from the inversion, we'd expect it to be a swan, not a duck. But what does it all mean? History might know. For now, it's just another one of those quirks that is the Dodge Viper, and yet another reason we'll miss it when it departs in 2011. Thanks to everyone for the tips!

[Source: Bits & Pieces via Boing Boing | Image: Micihi1308 via Wikimedia Commons]

Continue reading Turn the Dodge Viper logo upside down and guess who appears...

Turn the Dodge Viper logo upside down and guess who appears... originally appeared on Autoblog on Mon, 09 Nov 2009 18:38:00 EST. Please see our terms for use of feeds.

Read | Permalink | Email this | Comments

BREAKING: Dodge to end Viper production in July 2010, new car in 2012

Sam Abuelsamid — Wed, 04 Nov 2009 11:49:00 EST

Filed under: Performance, Chrysler, Dodge

2009 Dodge Viper ACR - Click above for high-res image gallery

At the Chrysler business plan meeting this morning, Ralph Gilles, CEO of the Dodge car brand, dropped big news on the Viper. After going back and forth for the past 18 months on what to do with Viper, Chrysler has decided that production of the current Viper will end in July 2010. Before that happens, 500 final cars will be built that, according to Gilles, will be the most special Vipers ever. Gilles explained that the company wanted to preserve the value of existing Vipers by not continuing the current generation indefinitely. He didn't give any details on what would be special with the final 500 cars.

However, Viper fans need not mourn yet. Gilles revealed that an all new car is being developed with a launch targeted in 2012! Even better the Viper will be getting some help from Chrysler's new Italian colleagues... and lets not forget about a certain Fiat outpost that uses a yellow-and-black Prancing Horse for its logo that's based in Maranello. Let's just hope they keep the Viper's elemental nature in the new generation.

Gallery: First Drive: 2008 Dodge Viper ACR

BREAKING: Dodge to end Viper production in July 2010, new car in 2012 originally appeared on Autoblog on Wed, 04 Nov 2009 11:49:00 EST. Please see our terms for use of feeds.

Permalink | Email this | Comments

First Ride: Devon GTX hopes to be an American Ferrari 599

Frank Filipponio — Fri, 25 Sep 2009 19:57:00 EST

Filed under: Coupe, Performance, Dodge, Mercedes-Benz, Ferrari, First Drive, Specialty, Luxury

2010 Devon GTX - Click above for high-res image gallery

When news of the Devon GTX first wafted our way, we didn't know what to think of it. Another bit of pretty vaporware being shown to attract investors? Another pet project from some megalomaniac with dreams of grandeur? Another American supercar boasting record-breaking performance with nothing but hot air to back up its claims? Or was it the real deal? Could Scott Devon and his team actually pull it off - could they deliver on the promise of building a truly great American supercar that could equal the world's finest?

Early reports showed that the Devon GTX would have the same power-to-weight ratio as the Ferrari Enzo with 650 horsepower propelling its 3,000 pounds, but the actual benchmark, we would later learn, was the Ferrari 599 GTB Fiorano. When the first pre-production car went out and set the production car lap record at Laguna Seca, it looked like they might not be bluffing about the numbers. And seeing the same car attract more than its fair share of attention from the highly jaded cognoscenti on the concept lawn at Pebble Beach made us think they might not be crazy after all. So did they pull it off? Did Devon actually succeed in building a car that could rival Maranello's front-engined supercar? We stopped by Aria Group, the Irvine-based specialty manufacturing facility that will be handling Devon production to find out. Follow the jump to see if the Devon GTX might just be the real thing.

Gallery: First Ride: Devon GTX

Continue reading First Ride: Devon GTX hopes to be an American Ferrari 599

First Ride: Devon GTX hopes to be an American Ferrari 599 originally appeared on Autoblog on Fri, 25 Sep 2009 19:57:00 EST. Please see our terms for use of feeds.

Permalink | Email this | Comments

VIDEO: Millyard Viper V10 - One more way to kill yourself quick stick a honkin' engine on two wheels

Jeremy Korzeniewski — Thu, 27 Aug 2009 16:59:00 EST

Filed under: Performance, Dodge, Motorcycle, Specialty

Millyard Viper V10 - Click above to watch the video after the jump

Proving that there's more than one way to shoehorn a massive 8.0-liter Viper V10 engine into a motorcycle is a certain Allen Millyard from the United Kingdom. We sorta prefer the industrial brute force look of the original Dodge Tomahawk with its unconventional suspension systems and leaning four-wheeled design, but Millyard's creation is unarguably truer to the established motorcycle ethos - two wheels, a powerful engine and not much else.

Predictably, Millyard's creation features one of the longest motorcycle wheelbases in recent memory, though there's little way to avoid that with ten giant cylinders hung between the two contact patches. It could be argued that you don't really need any gimmicks when packing 500 raging horses into such a light machine, and that's probably true. Still, we're thinking the next logical step for this insane motorcycle should include a couple of turbochargers and a quick shot of nitrous... and maybe a sidecar. Click past the break for a couple of videos (*NOTE: Second vid is sans audio).

[Source: Motorcycle News]

Continue reading VIDEO: Millyard Viper V10 - One more way to ~~kill yourself quick~~ stick a honkin' engine on two wheels

VIDEO: Millyard Viper V10 - One more way to ~~kill yourself quick~~ stick a honkin' engine on two wheels originally appeared on Autoblog on Thu, 27 Aug 2009 16:59:00 EST. Please see our terms for use of feeds.

Read | Permalink | Email this | Comments

VIDEO: Devon GTX on Laguna Seca

Jonny Lieberman — Mon, 17 Aug 2009 15:22:00 EST

Filed under: Coupe, Performance, Videos

Devon GTX - click above to watch the video

Over the weekend, we caught a glimpse of the new Devon GTX supercar running around Laguna Seca, and by all accounts, it looked pretty good. Details are still a little bit sparse, but because of the GTX's debut this past weekend, we know a bit more about it. For instance, under the carbon fiber hood is most definitely an 8.4-liter Dodge Viper V10 kicking out 650 horsepower at 6,100 rpm. No word on torque, but we'll just go on and assume it's copious. All that twisting and all those horses get routed through a six-speed manual on their way to the mega-fat rear wheels (19"x13"). That's a pretty potent $500,000 cocktail.

As we reported, the Devon GTX put its attributes to good use and set a Laguna Seca lap time "record" of 1.35.075. Piloting a track-focused version of the next American supercar to this very quick time was Justin Bell, son of Le Mans legend Derek Bell and one helluva driver in his own right.

Well guess what? Devon went ahead and created a very fancy video of Justin's lap. For our tastes, it's a little bit short. We would have liked less time spent on Bell putting on his racing suit and more time focusing on the GTX accelerating into turns 9 and 10, the two biggies after the Corkscrew. Maybe this is just a preview? Regardless, the two-and-a-half minute clip is well worth your time. High-res gallery below, full video after the jump.

Gallery: Monterey 2009: 2010 Devon GTX

[Source: Devon via YouTube]

Continue reading VIDEO: Devon GTX on Laguna Seca

VIDEO: Devon GTX on Laguna Seca originally appeared on Autoblog on Mon, 17 Aug 2009 15:22:00 EST. Please see our terms for use of feeds.

Permalink | Email this | Comments

Dodge Viper ACR wing stronger than your average spoiler

Michael Harley — Thu, 13 Aug 2009 14:28:00 EST

Filed under: Motorsports, Performance, Technology, Dodge, Design/Style

The elephantine rear airfoil bolted to the rear deck of the Dodge Viper ACR is not only highly functional, but it gets credit as being the first mass-produced carbon fiber-reinforced polymer (CFRP) wing on a production car. Rear wings on high performance vehicles are designed to counter lift. Without aerodynamic aids, most vehicles become less stable and have reduced grip as velocities increase (worst case, the vehicle actually flies as did the Mercedes CLR at Le Mans in 1999).

Chrysler's SRT Performance Group was tasked with building a faster variant of the Dodge Viper with the ACR, yet cutting weight at the same time. The team did extensive studies of wing profiles before settling on a 72-inch wide wing manufactured out of CFRP. While most wings have a structural core or ribbing, the ACR's hollow wing is comprised of just four layers of epoxy/carbon fiber weave with an outer UV-resistant clearcoat.

The wing is amazingly strong (as evidenced by the picture at right), yet it weighs just 7.5 lbs, 50 to 80 percent less than an aluminum or thermoplastic counterpart. Working in conjunction with a variable-geometry front splitter and dive planes, the oversized rear wing helps the Viper ACR achieve its targeted 1,000 lbs of downforce at 150 mph. That's enough to help Dodge's supercar sustain a cornering load of 1.5 Gs at speed - superior to many GT racing cars.

[Source: Composites World]

Dodge Viper ACR wing stronger than your average spoiler originally appeared on Autoblog on Thu, 13 Aug 2009 14:28:00 EST. Please see our terms for use of feeds.

Permalink | Email this | Comments

Spy Shots: Devon GTX chasing the production car 'Ring record

Jonny Lieberman — Tue, 11 Aug 2009 15:58:00 EST

Filed under: Spy Photos, Coupe, Performance

Why it was just last week that we talked about the Devon GTX "setting" the one lap "record" at Laguna Seca. We actually got on the horn and called Devon, ~~begging~~ asking for a detail or two about the GTX's upcoming reveal at Pebble Beach in just four short days (August 15). All we could get out of 'em is that yes, the GTX has a V10 under its hood -- and that was all they'd say. "Everything will be revealed" come Pebble Beach. Oh yeah?

Spy photographers working for Autocar caught some nice shots of the GTX at -- you guessed it -- the Nurburgring. According to the Brit pub, Devon is going after the production Nurburgring time (6:55) currently held by the Radical SR8 (which hardly qualifies as a "production car," but whatevs). Our British friends also speculate that the GTX has an all carbon fiber body to keep its weight low, low, low. Also: Justin Bell, son of five-time Le Mans winner Derek Bell, was at the wheel for the 'Ring attempt. We believe that last part 100% as Devon told us Justin was the driver for the Laguna Seca "record."

Obvioulsy, it's not August 15 yet but it's safe to assume a big part of the GTX's launch is going to be how it did on the Nurburgring. As Tom Leykis says, "Do you care?" Either way, that's marketing for you.

One more little point: As we learned last week, the GTX's one lap Laguna Seca time was one tenth of a second faster than the Dodge Viper ACR. Laguna Seca is two miles long, the Nordschleife section of the Nurburgring is fourteen miles long. Taking all the other variables off the table and the GTX could run the 'Ring about half a second quicker than the Viper ACR. To refresh your memory banks, the Viper ACR did the deed in 7:22, and the GTX is chasing 6:55.

[Source: Autocar]

Spy Shots: Devon GTX chasing the production car 'Ring record originally appeared on Autoblog on Tue, 11 Aug 2009 15:58:00 EST. Please see our terms for use of feeds.

Permalink | Email this | Comments

REPORT: Next-Gen Dodge Viper could get Ferrari-derived V10

Noah Joseph — Mon, 10 Aug 2009 13:25:00 EST

Filed under: Performance, Dodge, Maserati, Ferrari

Dodge Viper SRT-10 - Click above for high-res image gallery

Way back in 1987, Chrysler bought up a troubled Lamborghini, and within two years put it to work developing a V10 engine program that would eventually give birth to both the Dodge Viper and the Lamborghini Gallardo - two of the first ten-cylinder engines on the modern market. Two decades later, the tables have turned: instead of buying up struggling Italian automakers, it's Chrysler that's troubled and the Italians are coming to the rescue. And now reports suggest that the replacement for the Viper's V10 could be derived from Ferrari's next-generation engine program.

Chrysler's original plan was to sell of the Viper business, but since no serious offers came through, Fiat CEO Sergio Marchionne is reportedly keen on taking advantage of the sportscar's standing as the company's halo vehicle. But rather than have Chrysler shoulder the entire burden of developing the next-generation Viper, the engine program could be derived from the same modular powerplant that will propel upcoming Ferraris and Maseratis.

Ferrari has essentially had four engine designs in its history: the Colombo design was in use from the company's beginnings all the way through the '90s. The Lampredi engine was used on a handful of vehicles in the 50's before being phased out. The Dino engine spawned V6, V8 and V12 versions and was in use until just a few years ago, while the current Ferrari/Maserati engine powers everything in the both companies' current ranges as well as the Alfa Romeo 8C Competizione. Its 90-degree replacement will likewise offer variable configurations: a flat-plane crank V8 for Ferrari, a cross-plane crank for Maserati and a pushrod V10 for the Viper.

[Source: Car and Driver]

REPORT: Next-Gen Dodge Viper could get Ferrari-derived V10 originally appeared on Autoblog on Mon, 10 Aug 2009 13:25:00 EST. Please see our terms for use of feeds.

Read | Permalink | Email this | Comments

Devon GTX sets one-lap "record" at Laguna Seca

Jonny Lieberman — Fri, 07 Aug 2009 10:28:00 EST

Filed under: Coupe, Performance, Etc., Misc. Auto Shows

Devon GTX - Click above for high-res image gallery

The last time I brought up the fallacy of purchasing a car (or even being a fan one one) based off a "lap record," I was called a pimp and much worse. Luckily, my skin is rhino-thick - so here's me doing it again. But first, let's talk about the car claiming to be the new King of the Corkscrew, the Devon GTX. Well, we know very little. It's been speculated that the GTX is powered by Viper, meaning there's an 8.4-liter V10 beating under its presumably carbon fiber skin. Word overheard on the street is that the serpent heart has been reworked to spit out 650 horsepower, 50 more venomous ponies than stock. And that's all anyone knows. Maybe.

What we do know is that Southern California-based industrial design haus Devon Motorworks is claiming that its new car - the "next American Supercar" - just set a "production car" one-lap record around the fabled Lagauna Seca race track. Time? 1:35.075. Having driven Laguna Seca once or twice my own self - came very close to setting the all time slowest lap, thank you - that's quite a fast time. But... to quote (once more) Jack Baruth, "Lap times set on different days, under different conditions, simply aren't comparable. It's that simple. Some days are hot, some days are cool, some days there's rubber on the track, some days there's oil. The same competent driver, in the same car, might have a fifteen-second variation from one 'Ring session to the next."

Obviously, the Nurburgring is much longer than Laguna Seca - 14 miles versus two. Even still, if you divide Jack's fifteen-second variation by seven you get a bit more than two seconds, i.e. a lifetime on a racetrack. Cut that time differential in half and you're still talking over a second per lap, just based on environmental factors. For comparison's sake, a 2008 Dodge Viper SRT10 ACR lapped Laguna in 1.35.117. Is the more powerful Devon GTX only one tenth of a second quicker than the big Dodge around a two-mile track? Couldn't the wind account for that much time? Or a few birds flapping their wings? A larger point (also brought up by Jack) is that this particular lap attempt was closed to the public and (presumably) conducted by Devon. Without calling the results meaningless, we would like to point out that the brand new Autoblog Track-a-Tack-a-Kuh GTR3X just lapped Laguna in 1:35:065. What, you won't take our word for it?

Regardless of your feelings (or ours) regarding the Devon GTX, it will be making its debut next weekend at Pebble Beach. Cars should be available for public consumption come quarter one of 2010. Full press release after the jump.

Gallery: Devon Motor Works GTX renderings

[Source: Devon Motorworks]

Continue reading Devon GTX sets one-lap "record" at Laguna Seca

Devon GTX sets one-lap "record" at Laguna Seca originally appeared on Autoblog on Fri, 07 Aug 2009 10:28:00 EST. Please see our terms for use of feeds.

Permalink | Email this | Comments

VIDEO: 2010 Nissan GT-R makes supercar friends

Jonny Lieberman — Wed, 29 Jul 2009 14:28:00 EST

Filed under: Coupe, Performance, Japan, Videos, Nissan

Supercar parade - Click above to watch the videos after the jump

It's Godzillapalooza time boys and girls! More precisely, the day before the 2010 Nissan GT-R had to go back, my buddy Steve asked if I could give him a ride in the Skyline. Well, he'd actually been calling since two weeks before the car showed up, but anyhow, Steve is a filmmaker and he showed up camera in hand. Our plan, quite honestly, was just a quick blast across some empty freeways and nothing more. But then we saw the exit for Angeles Crest Highway and even though it was amateur day (Sundays = dozens of motorcycles riding off sheer cliffs in front of cops) we figured Steve should see Godzilla eat a canyon. Plus, after you get a few miles up you can turn left off Angeles Crest onto Angeles Highway, a much less congested (and some would argue better) road.

What happened next is one of the many reasons I'm never leaving Southern California. Stuck behind a pickup truck is a veritable supercar parade. From front to back: Ferrari F355 Spyder, Ferrari F430 Spyder, ~~Mothra~~ BMW M6, Dodge Viper SRT10, Ferrari F430 Spyder. I can't say for certain, but I think Godzilla was smiling. Eventually the truck pulled over and it was on. Well, OK, we got stuck behind the slow Ferrari, but it was still quite fun.

We all stopped for lunch where we asked the drivers if the matching Ferrari shirts add 5 horsepower. Then we hopped back in the cars, but not before I announced that the Nissan would be running mid-pack. The Viper driver yelled, "Try to keep up!" Little did he know I was wearing my high performance flip-flops. Thanks to Steve for filming and cutting the video: follow the jump to watch it.

Continue reading VIDEO: 2010 Nissan GT-R makes supercar friends

VIDEO: 2010 Nissan GT-R makes supercar friends originally appeared on Autoblog on Wed, 29 Jul 2009 14:28:00 EST. Please see our terms for use of feeds.

Permalink | Email this | Comments

You Had Your Chance: Chrysler says Viper program is no longer for sale

Drew Phillips — Fri, 10 Jul 2009 17:05:00 EST

Filed under: Supercars, Dodge

2008 Dodge Viper ACR - Click above for a high-res image gallery

The future of the Dodge Viper has been in question since the summer of 2008, when it was reported Chrysler was considering selling the rights to their halo sports car instead of killing it all together. Initially, there seemed to be plenty of interested parties, including Roush and Saleen, but the dwindling economy led to just one lowball offer from Michigan-based Devon Motor Works. Even after the Viper's production facility re-opened last month, it was still assumed that the 600 horsepower sports car would up for grabs. Not anymore.

Today, Chrysler announced that the Viper program is no longer for sale and that it will be continued to be produced past the end of the year at the Conner Avenue Assembly Plant. There was no mention as to why the decision was made or what will happen beyond 2010, but for now, the Viper is safe. The official press release doesn't offer much information, but you check it out after the jump, along with a video from Chrysler discussing the decision and giving brief history of the Viper.

Gallery: First Drive: 2008 Dodge Viper ACR

Continue reading You Had Your Chance: Chrysler says Viper program is no longer for sale

You Had Your Chance: Chrysler says Viper program is no longer for sale originally appeared on Autoblog on Fri, 10 Jul 2009 17:05:00 EST. Please see our terms for use of feeds.

Permalink | Email this | Comments

eBay Find of the Day: The 'Nunrunner' V10-powered eight-door Dodge Dart Limowagon [w/VIDEO]

Jeremy Korzeniewski — Thu, 09 Jul 2009 19:00:00 EST

Filed under: Classics, Wagon, Auctions, Etc., Videos, Dodge, Specialty

1962 Dodge Dart limo 'Nunrunner' - Click above for high-res image gallery

And now for something completely different. We can't recall ever seeing another vehicle quite like this 1962 Dodge Dart, which was converted into a limo wagon that was supposedly intended for the Vatican and later sold to a Catholic Church in Kentucky - and that's probably for the best.

As scary as the beast may be to look at, the team from Wicked Rides Inc. reports that it's actually a trouble-free driver thanks to the modern V10 engine yanked from a Dodge Ram and T56 six-speed manual transmission from a Viper it was blessed with when converted into The Nunrunner - reliable enough, in fact, to have taken part in the last Hot Rod Power Tour with nary a breakdown.

Underneath the rusty outer shell sits a chassis that's been fortified with the K-frame and suspension bits from a 2004 Corvette Z06, though we doubt it handles anything like the pilfered sportscar from which those bits came. To fully take in all that the Nunrunner has to offer, we suggest you amble through our photo gallery below and click past the break for a couple of drag racing videos where the eight-door contraption lines up against a Shelby Cobra (real or knockoff, we're not sure) for a trip down the 'ole 1320.

Interested in making this unique vehicle your own? Click here for the actual eBay auction. Current bid: $1,075 (reserve not yet met). Thanks for the tip, Richard!

Gallery: 1962 Dodge Dart limo 'Nunrunner'

[Source: eBay]

Continue reading eBay Find of the Day: The 'Nunrunner' V10-powered eight-door Dodge Dart Limowagon [w/VIDEO]

eBay Find of the Day: The 'Nunrunner' V10-powered eight-door Dodge Dart Limowagon [w/VIDEO] originally appeared on Autoblog on Thu, 09 Jul 2009 19:00:00 EST. Please see our terms for use of feeds.

Read | Permalink | Email this | Comments

VIDEO: Twin-turbo Viper V10-engined Ford Mustang looks to be one sick pony

Chris Shunk — Thu, 02 Jul 2009 12:28:00 EST

Filed under: Aftermarket, Coupe, Videos, Dodge, Ford

Viper-powered Mustang - Click above to watch the video after the jump

We love Ford Mustangs of all shapes and sizes, and the age-old adage of "the more power the better" definitely applies. Scott Vanderschoor, a regular on Bang Shift forums, is working on one hell of a pony car; one that carries the panache of a 'Stang and the power of a Dodge Viper - with a pair of turbochargers providing a little additional motivation. Unsurprisingly, Vanderschoor reportedly needed to move back the firewall a half foot to make room for the massive 8.4L V10 engine, but we're guessing the labor will pay off with some absolutely incredible power numbers.

Hit the jump to see Vanderschoor's big beast as it turns over on camera for the first time. The sound is a bit different than you'd expect from a typical Mustang V8 growl and we're guessing that it has a little more oomph under the hood than most pony cars on the road - even before Vanderschoor tuning gets sorted out. This is one Mustang project we're looking forward to seeing more of! Check out the gallery below in addition to the video after the jump.Thanks for the tip, Brian L!

Gallery: Viper-powered Mustang

[Source: Bang Shift]

Continue reading VIDEO: Twin-turbo Viper V10-engined Ford Mustang looks to be one sick pony

VIDEO: Twin-turbo Viper V10-engined Ford Mustang looks to be one sick pony originally appeared on Autoblog on Thu, 02 Jul 2009 12:28:00 EST. Please see our terms for use of feeds.

Read | Permalink | Email this | Comments

Chrysler to restart seven North American plants by end of month

Chris Paukert — Wed, 17 Jun 2009 15:29:00 EST

Filed under: Plants/Manufacturing, Chrysler

Hot on the heels of news that the Dodge Viper's Conner Avenue facility would be the first Chrysler plant to fire up after the company's bankruptcy proceedings/Fiat tie-up comes official word that the automaker will resume production at seven plants the week of June 29. In addition, Chrysler will bring the supporting powertrain and stamping plants online that supply the assembly factories listed below with parts.

According to Ed Garsten, Chrysler's manager of electronic media communications, the following assembly plants will resume production as part of a "phased production ramp-up" -

Sterling Heights Assembly Plant (Sterling Heights, MI) - Chrysler Sebring and Dodge Avenger
Warren Truck Assembly Plant (Warren, MI) - Dodge Ram and Dodge Dakota
St. Louis North Assembly Plant (Fenton, MO) - Dodge Ram
Toledo Supplier Park (Toledo, OH) - Jeep Wrangler and Jeep Wrangler Unlimited
Brampton Assembly Plant (Brampton, Ontario, Canada) - Chrysler 300, Dodge Charger and Challenger
Windsor Assembly Plant (Windsor, Ontario, Canada ) - Chrysler Town & Country and Dodge Grand Caravan
Toluca Assembly Plant (Toluca, Mexico) - Dodge Journey and Chrysler PT Cruiser

Despite the start-ups, all Chrysler plants will again idle for two weeks in the second half of July as part of a previously scheduled summer break.

Source: Chrysler | Image: Bill Pugliano/Getty]

Chrysler to restart seven North American plants by end of month originally appeared on Autoblog on Wed, 17 Jun 2009 15:29:00 EST. Please see our terms for use of feeds.

Permalink | Email this | Comments

Dodge Viper assembly plant first Chrysler facility to restart after bankruptcy?

Chris Shunk — Tue, 16 Jun 2009 09:58:00 EST

Filed under: Convertible, Plants/Manufacturing, Supercars, Dodge

Dodge Viper - Click above for a high-res image gallery

The new Chrysler Group, LLC exited from bankruptcy last week, yet its factories have remained closed. CNN Money reports that this streak of inactivity will end when the 115 workers that assemble the Dodge Viper return to business at the Conner Avenue plant in Detroit. The start-up of Chrysler's smallest plant ends seven weeks of shuttered facilities.

Despite Fiat taking a stake in the Viper's parent company, Chrysler, the high-horsepower snake is likely still up for sale. In the meantime, Chrysler could likely use the added revenue that comes with selling 600 horsepower, $90,000 supercars. That the facility will soon be up and running is a good thing, too, as it signifies some demand for a Dodge-brand legend that could live on - even if it is to do so under a different corporate umbrella.

All-in, The Pentastar has only sold 25,000 copies of the Viper since it went on sale in 1992. Thanks for the tip, Dave!

Gallery: 2008 Dodge Viper SRT-10

[Source: CNN Money]

Dodge Viper assembly plant first Chrysler facility to restart after bankruptcy? originally appeared on Autoblog on Tue, 16 Jun 2009 09:58:00 EST. Please see our terms for use of feeds.

Read | Permalink | Email this | Comments