Rezvani Beast

Last we heard of Rezvani Motors and its Beast, we were still recovering from our St. Patrick's Day festivities (note: green beer in every iteration means pain). Back then, it was a mere photo that introduced us to this new, California-based company, although the promises of that photo - sharp bodywork and what looks like a pushrod front suspension - were enough to get us a bit excited about the latest exotic startup.

Now, we have a whole lot more details on this car, and despite concerns that this is merely another piece of vaporware, the Beast seems quite nicely grounded in reality.

The body is pretty darn attractive, with a wide, low look. The thin slivers for the headlights and taillights catch your eye first, while the rear three-quarter view is set off by the racy hump where the engine sits. All in all, it's a pretty eye-pleasing piece of design. That's especially impressive considering the car that's used as a base – the Ariel Atom.

The Beast is based very heavily on the English track weapon, to the point that Atom owners could send their cars to Rezvani's Orange County, CA facility for an upgrade. So straight away, we know that there are some solid bones beneath that sleek bodywork. But has that bodywork dampened the Atom's sense of excitement? On paper, it doesn't look like it. Using carbon-fiber panels for the body, Rezvani is claiming a 1,550-pound curb weight for the heaviest example.

So, it's got a focus on weight. What about power? The Beast's Atom roots show through again, as a 2.0-liter, turbocharged four-cylinder and a 2.4-liter, supercharged V8 will be available. The 2.0T is called the Beast 300, and will happily zoom to 60 miles per hour in 2.9 seconds. Opt for the Atom V8-based Beast 500, and you'll hit 60 in just 2.7 seconds. Like the Atom, power is channeled to the rear wheels through a six-speed manual transmission to a set of sticky Toyo tires.

This all sounds very, very promising. While it might look like we're setting up for one, there's no "but" here. The Beast seems reasonably priced, starting at $119,000 for the Beast 300 and $139,000 for the Beast 500. If you already own an Atom 2.0T or V8, slash those numbers to $49K and $69K, respectively.

Take a look at a brief gallery of images and the press release and then head into Comments and tell us: if you were the type of person that could afford an Atom (rich), would you ship it off to Rezvani? Would you bypass Ariel ownership all together and pay the $119,000 to $140,000 to pick up a Beast of your own? Let us know.
Related GalleryRezvani Beast
Rezvani BeastRezvani BeastRezvani BeastRezvani BeastRezvani BeastRezvani BeastRezvani BeastRezvani Beast
Show full PR text
Rezvani BEAST: An Extreme New High-Performance Roadster

Orange County, CA. 05/05/14. -- Today Rezvani is very proud to unveil BEAST to the automotive world. Based on the Ariel Atom*, this exclusive, world-class roadster redefines the segment.

Born on the track and designed for the road, the Rezvani BEAST gives new meaning to the lightweight, high-performance sports car, with world class styling. From a six-speed manual transmission, to a rear-wheel drive layout, every inch of BEAST is built with the driver in mind - raw, pure, and powerful.

Performance

Thanks in part to its 1,550 lb curb weight, the BEAST 500 can sprint from a standstill to 60 mph in 2.7 seconds. The BEAST 300 can reach 60 mph in only 2.9 seconds, tipping the scales at a featherlight 1,470 lbs.

Power comes from either a 2.0-liter turbocharged, or 2.4-liter supercharged mid-mounted engine that can produce 315, and up to 500 horsepower respectively.

Both engines are prepared by Ariel Atom specialists DDM Works of South Carolina. DDM Works president, Dave Michel, provides this overview:

"When the engine is built, the block is disassembled, and checked for defects, etc. Then the crank bearing surfaces are polished, the block is cleaned, bored, decked and prepped for the new high-performance parts.

The engine is assembled with all new parts - upgraded pistons, forged H beam rods, ARP studs, and optional clutch upgrades - and filled with a break-in oil for the first start. On the 500hp twin charge versions, stock cams are used and stock heads, although the head is disassembled, cleaned, pressure checked, surfaced and put together with new seals."

The high-output engine is paired to a limited slip six-speed manual gearbox, and a rear wheel drive layout. All with minimal electronic interference that provides drivers with tactile feedback and extreme response."

Design

Under the direction of Rezvani Automotive Designs - the same firm involved in the design and development of the Vencer Sarthe - BEAST's stunning look was created by renowned automotive designer Samir Sadikhov. Samir is known for designs like the Aston Martin DBC, and Ferrari Xerzi concepts. The BEAST is the very definition of an aggressive, open-top supercar with minimalist surfaces and ultimate performance proportions.

Beginning at the low-friction front fascia, the body lines extend out to create a streamlined appearance. Paired to angular rear panels, air flows over the car to provide maximum downforce at high speeds.

Engineering

Built on the Ariel Atom's* platform, BEAST uses the industry's foremost carbon fiber production methods. Thanks to our partners at N2A motors - a specialty composite body maker with a rich history in making concept cars for large manufacturers - engineers are able to custom fit each body using 3D printing technology and CNC milling techniques.

"We are going to take the CAD data and turn it over to my CNC programmers where we will write the cutting program to CNC, and cut a urethane foam 3D model of the car on our gantry mill." says Gene Langmessner, CEO of N2A Motors. "Then we will prepare that model for pulling a mold from."

"After making the composite mold we will be able to lay-up the carbon fiber parts to place on the donor chassis. After we lay-up the carbon parts and fabricate/engineer/scheme a way of fitting them to the chassis, we document the process and take additional molds where needed in order to repeat the process for production. Then surface, paint color sand and buff and the car is ready for the show circuit! This process will be about 1,000 – 1,500 man-hours spanning over the next 5-6 months."

The BEAST will also feature a fully removable windshield, a roll cage, and a set of RS05 PUR wheels wrapped in front 235/35/19 and rear 295/30/19 Toyo tires.

Price

In order to celebrate Rezvani's launch of the BEAST, the first two models of the BEAST 300 and BEAST 500 will be offered at a special "Launch Edition" price. For the BEAST 300 Launch Edition, the first two lucky clients will be able to purchase this high-performance roadster for only $99,500 USD. The BEAST 500 Launch Edition begins at $124,900 USD. A full day of professional race track driving class is also available to BEAST 500 owners at no extra cost.

The MSRP for the standard model (not including Launch Edition) begins at $119,000 for the BEAST 300, and $139,000 for the BEAST 500.

The Rezvani BEAST is also available as an upgrade to current Ariel Atom* owners for $49,000 for the BEAST 300, and $69,000 for BEAST 500 Launch Editions.

*Note: Rezvani does not sell the Ariel Atom, but is able to assist clients in sourcing and delivery of Atoms to our Orange County, Ca., facility.

Partners

Together with DDMWorks, N2A Motors, and Sabet Brands, Rezvani is able to compile the best in branding experts, performance specialists, and body molding experts to create this one-of-a-kind driving experience for the road and track.

In order to expedite the production process, Rezvani is focusing on putting its resources towards tooling and production methods for BEAST, rather than a one-off show car. Each car is made to order and delivery time is typically three to five months, depending on options and personalization. The Rezvani BEAST is now available for purchase.