Ferrari is quick to point out that while output across its lineup has jumped roughly 100 horsepower in the last four years, fuel consumption and emissions are down nearly 30 percent. Such gains in efficiency are made through a holistic approach, including engine tuning, aerodynamics, tires, and so on.

A a good part of any gain in efficiency can be made through the use of exotic materials and lightweight structural components. With the F70 Enzo successor still in development, the folks from Maranelo chose Paris to display a carbon-fiber architecture, apparently for the limited-run roadcar. Developed with help from Ferrari's Formula One Chief Designer, Rory Byrne, the carbon fiber structure looks to support a mid-engined layout and provides spaces for upward-swinging doors (see: Enzo butterfly doors).

Ferrari says that it sought for alternatives to conventional carbon fiber manufacturing techniques. Instead, methods and materials were shared by Scuderia Ferrari, using four different types of carbon fiber – all hand-laminated.

According to Ferrari, the chassis of the limited-run vehicle is 20 percent lighter than the Enzo, even with the added weight necessitated by hybrid components (though it isn't clear if the completed car will also be 20 percent lighter). All we know is, few automakers can get us excited about a substructure like Ferrari.
Show full PR text
Ferrari showcases complete range of new-generation models at Paris

World premiere for new F1 composite chassis for upcoming limited-edition special series


Paris, September 27th – The Ferrari display at the Paris Salon showcases the five cars making up the current range, each of which represents a new generation of the company's 8- and 12-cylinder models.

The F12berlinetta is the most powerful and high-performance V12 ever built, thanks to its 740 hp power output and light, compact architecture. It is flanked by a model with a complementary mission, the FF, our revolutionary four-seater four-wheel-drive car which now sports a new full-length panoramic roof in a special reflective glass (LowE) that gives occupants a genuine open-air driving feeling, while providing thermal and acoustic insulation.

The coupé and the Spider versions of the 458, powered by the V8 that has won the Best Performance Engine Award for two consecutive years, are designed for owners seeking a sportier driving experience. The California 30 – the '30' in the name referring to the reduction in weight and increase in horsepower introduced on the model earlier this year - is aimed at owners who put more store in greater versatility of use.

In line with its "Different Ferraris for different Ferraristi" philosophy, these cars are designed to fulfil complementary roles without compromising their DNA which remains absolutely unique in terms of performance, driving pleasure and advanced technologies. All offer exclusive design that combines modern styling with traditional cues typical of the marque.

Ferrari continually invests significant sums in its product range and this has led to the creation of 8- and 12-cylinder engines whose specific power outputs, levels of torque and maximum rev limits are unprecedented while, at the same time, offering improved fuel efficiency. Important innovations have led to reductions in the weight of our cars, too. In fact, the Scaglietti facility, which specialises in aluminium fabrication, works with more than 25 different alloys, some of which are being used for the first time in the automotive sector.

While power has been boosted by approximately 100 hp across the model range, fuel consumption and emissions have been reduced by 30 per cent compared to four years ago thanks to work done not only on our engines and structural components, but also on aerodynamics, tyres and vehicle sub-systems.

Ferrari continues to invest heavily in innovation and is planning to launch the first hybrid model in its history in the near future. Having already revealed the power unit's architecture and components, Ferrari has chosen Paris to debut the new composite chassis derived directly from Formula 1 technologies.

Ferrari drew on its vast experience in working with composites for single-seaters for its new hybrid model which will be produced in a limited-edition, special series. For this model Ferrari chose not to use the industrial carbon-fibre manufacturing techniques, such as RTM (Resin Transfer Moulding), normally adopted in the automotive sector, as they did not meet the quality and functional standards Ferrari set itself.

The materials, design methodologies, construction processes, staff and instruments used are all shared with the Scuderia Ferrari, with the formation of a working group which relied on an important contribution from Rory Byrne, Ferrari's F1 chief designer who was behind 11 of the team's Championship titles.

The chassis uses four different types of carbon-fibre and is hand-laminated then cured in autoclaves following engineering processes which optimise the design by integrating the different components.

The main structure is made from T800 carbon with local, strategic applications of T800UD, a unidirectional carbon-fibre tape, for reinforcement. To ensure weight was kept to an absolute minimum, the structural underbody and the cross-member are made from another type of particularly high tensile strength carbon-fibre known as M46J. In certain critical areas, such as the doors, very tough T1000 was adopted as it is particularly efficient in terms of impact absorption which is why it is used in the nose-cone of the single-seaters. Carbon-fibre is combined with Kevlar® for the undertray to prevent damage from debris thrown up from the road.

The overall chassis is 20 percent lighter than the Enzo Ferrari, despite the extra weight required by housing the hybrid components and to meet regulatory obligations. Torsional rigidity is increased by 27 percent and beam stiffness is up by 22 percent.


I'm reporting this comment as:

Reported comments and users are reviewed by Autoblog staff 24 hours a day, seven days a week to determine whether they violate Community Guideline. Accounts are penalized for Community Guidelines violations and serious or repeated violations can lead to account termination.


    • 1 Second Ago
  • 19 Comments
      kwekut
      • 2 Years Ago
      I love the fact that the front suspension mount are integrated into the chassis. This will make for an extremely rigid structure with virtually no flex, and should allow it to drive like hell. Pretty smart thinking there. I think this time ferrari is not resting on its laurels but actually breaking ground with technologies like the full carbon chassis and hykers hybrid system. I just hope in the chase for advancement they don't lose their soul and become like Mclaren (Perfect but with no character)
        Alex Butti
        • 2 Years Ago
        @kwekut
        All the new Ferrari are like that. From the 360 Modena, the 430, the $58 Italia, and of course the FXX, and the 599XX (take a look at the link below). http://www.flickr.com/photos/20733247@N06/sets/72157626691708691/ :)
      treeinsc
      • 2 Years Ago
      Wait to see how the car looks like.
      evannever
      • 2 Years Ago
      Yes, but is this the one for straight line tests or the one for curves?
      GRR
      • 2 Years Ago
      waw cant wait
      Jonathan Ippolito
      • 2 Years Ago
      This is nice and all but I really want to see the complete Enzo successor .
      Jonathan Ippolito
      • 2 Years Ago
      This is nice and all but I really want to see the complete Enzo successor .
      Jonathan Ippolito
      • 2 Years Ago
      This is nice and all but I really want to see the complete Enzo successor .
      madFerrariFan
      • 2 Years Ago
      Yes waiting anxious crazy to see the car in final shape
      Mike Fernandez
      • 2 Years Ago
      What's most interesting to me are the cut-outs in the room panel. Are we going to see Ford GT-esc doors that have room panels? Gull-wing doors? What!?! This car will be sure to excite, but I can't wait to see the McLaren P1 pounce this thing
        Chris Doan
        • 2 Years Ago
        @Mike Fernandez
        Where have you been? The Enzo had the very same cut outs. The doors will likely open in a diagonal fashion like the previous flagship Ferrari and the McLaren F1. It won't have gull wing doors like the SLS though, that's distinctively Mercedes.
        Chris Doan
        • 2 Years Ago
        @Mike Fernandez
        Where have you been? The Enzo had the very same cut outs. The doors will likely open in a diagonal fashion like the previous flagship Ferrari and the McLaren F1. It won't have gull wing doors like the SLS though, that's distinctively Mercedes.
    • Load More Comments