• 10

Just because Ford doesn't have new plug-in car or a better EcoBoost engine to talk about doesn't mean it can't send out a message in time for Earth Day (this Thursday). That message: we use old stuff in our new cars. More specifically, we recycle a lot of old stuff – plastics, "post-industrial yarns" (which are not tales of the after-manufacturing apocalypse, apparently) – and bioproducts into things like seats and doors. While it's a good green message to get out, Ford also happens to save, by its own calculations, approximately $4.5 million by recycling materials. Add in the 25 to 30 million pounds of plastic diverted from the landfill, and it's a pretty convincing deal.

Ford says that its vehicles are now 85 percent recyclable by weight, which is a level brands as different Volvo and Bentley have already reached with some of their vehicles. The overall industry standard in 2007 was 84 percent. As we've heard for years, vehicles are some of the most-recycled items in the U.S., with 95 percent of vehicles are recycled at the end of life. Read Ford's complete message after the jump.

[Source: Ford]



* Ford is making its vehicles, which are 85 percent recyclable by weight, more eco-friendly through increased use of renewable and recyclable materials; the 2010 Ford Taurus is the latest model to use eco-friendly bio-based seat cushions
* In 2009, Ford reduced the amount of automotive-related plastics to landfills by nearly 30 million pounds and saved approximately $4.5 million by reusing recycled materials
* Ford's "reduce, reuse and recycle" commitments are part of its broader global sustainability strategy to reduce its environmental footprint
* Automobiles are among the most recycled consumer products. More than 95 percent of all end-of-life vehicles in the U.S. are processed for recycling – compared to 52 percent of all paper and 31 percent of all plastic soft drink bottles

DEARBORN, Mich., April 20, 2010 – Ford is making its vehicles more eco-friendly through increased use of renewable and recyclable materials such as the soy and bio-based seat cushions and seatbacks on the 2010 Ford Taurus.

Ford vehicles are now 85 percent recyclable by weight. In 2009, Ford saved approximately $4.5 million by using recycled materials, and diverted between 25 and 30 million pounds of plastic from landfills in North America alone.

"By increasing the use of recycled or renewable content and reducing the use of undesirable materials whenever possible, we're helping to reduce waste to landfills by millions of pounds – and we're doing it around the world," said John Viera, Ford's director of Sustainability and Environmental Policy. "More than ever before, the spirit of ONE Ford that drives our global product strategy also drives our commitment to sustainability."

The 2010 Ford Taurus is the eleventh Ford vehicle to feature earth-friendly bio-based seat cushions and seatbacks. Ford has more vehicle models with seats that use soy and other bio-based foams than any other automaker. Ford Mustang, F-150, Focus, Flex, Escape, Expedition and Econoline as well as Mercury Mariner, Lincoln MKS and Navigator also use the sustainable material.

"We already have bio-based foam on more than 2 million vehicles and we're looking to convert 100 percent of our fleet to it in the future," said Jerry Brown, Ford chief engineer of seat and restraint engineering. "This is just one way that Ford is advancing the use of eco-friendly materials in the industry."

Ford's "reduce, reuse and recycle" commitments are part of the company's broader global sustainability strategy to reduce its environmental footprint while accelerating the development of advanced fuel-efficient vehicle technologies around the world.

Building in green materials
For the past several years, Ford has concentrated on increasing the use of non-metal recycled and bio-based materials, including:

* Bio-based (such as soy) polyurethane foams on the seat cushions, seatbacks and headliners on 11 vehicle models. The 2 million Ford, Lincoln and Mercury vehicles on the road today with bio-foam seats equates to a reduction in petroleum oil usage of approximately 1.5 million pounds
* Post-consumer recycled resins such as detergent bottles, tires and battery casings used to make underbody systems, such as aerodynamic shields, splash shields and radiator air deflector shields. The latest example is the engine cam cover on the 3.0-liter V-6 2010 Ford Escape. As a result, Ford has diverted between 25 and 30 million pounds of plastic from landfills
* Post-industrial recycled yarns for seat fabrics on vehicles such as the Ford Escape and Escape Hybrid. A 100 percent usage of recycled yarns can mean a 64 percent reduction in energy consumption and a 60 percent reduction in CO2 emissions compared to the use of new yarns
* Repurposed nylon carpeting made into nylon resin and molded into cylinder head covers for Ford's 3.0-liter Duratec® engine. The industry's first eco-friendly cylinder head cover is used in the 2010 Ford Fusion and Escape
* The automotive industry's first application of wheat straw-reinforced plastic for the third-row storage bins of the 2010 Ford Flex. The natural fiber replaces energy-inefficient glass fibers commonly used to reinforce plastic parts

In support of Ford's global product development strategy, material engineers are developing standardized specifications for sustainable materials while working with parts purchasers and suppliers to use eco-friendly components in different markets.

For example, the European Ford Focus uses recycled polymer in such components as the battery tray, wheel arch liners, seat fabric and carpets. Materials engineers are in the process of determining if recycled polymer can be used for similar components in the global Focus coming to North America and Europe in 2011.

"Sustainable materials need to meet the same high standards for quality, durability and performance as virgin material; there can be no compromise on product quality," said Valentina Cerato, Ford materials engineer in Europe.

What the future holds
Materials researchers continue to explore sustainable material applications, such as an eco-friendly replacement for the fiberglass used between the headliner and roof sheet metal that will be bio-based, lighter weight, and will deliver improved acoustics and neutralize odor.

In addition, Ford researchers are developing natural-fiber composites as a potential substitute for the glass fibers traditionally used in plastic car parts to make them stronger while reducing vehicle weight, which helps improve fuel economy and reduces emissions. Natural fiber composites also are more eco-friendly, because their production and end-of-life incineration are less energy intensive than glass fibers, which also results in lower emissions.

Ford researchers also are investigating ways to use plastics made entirely from sustainable resources such as corn, sugar beets, sweet potatoes and other vegetables. These renewable materials will help reduce dependency on petroleum, reduce CO2 emissions and allow the composting of the material at the end of a vehicle's life.

"Natural fiber-reinforced plastics and plant-based polymer resins help reduce CO2 emissions by being entirely compostable, and in some cases reduce weight, which helps improve fuel economy," said Debbie Mielewski, technical leader, Ford Plastics Research. "We have to entertain the thought of bio-replacement in baby steps, looking at every aspect of a car that could be green. One day I hope to see the world of automotive plastics go totally compostable, removing petroleum by 100 percent."

What comes out
Automobiles are among the most recycled consumer products in the world. According to the Environmental Protection Agency, more than 95 percent of all end-of-life vehicles in the U.S. are processed for recycling – compared to 52 percent of all paper and 31 percent of all plastic soft drink bottles.

In Europe, automakers are required to take back the vehicles they've produced at the end of the vehicles' useful lives. Ford has end-of-life recycling networks for its vehicles in 16 European markets and participates in industry collective systems in another 10. In 2007, Ford became one of the first automakers in Europe to be certified in compliance with end-of-life requirements, including:

* Design and produce vehicles that facilitate the dismantling, reuse, recovery and recycling of them at end-of-life
* Reduce the use of hazardous substances when designing vehicles
* Increase the use of recycled materials in vehicle manufacture
* Ensure that parts do not contain mercury, hexavalent chromium, cadmium or lead

Reuse is a big part of the recycling story. Auto recyclers supply more than one third of all ferrous scrap to the U.S. scrap processing industry. When manufacturers use scrap iron and steel instead of newly produced ore, they reduce air and water pollution by more than half during the manufacturing process.

"In theory, end-of-life vehicles are nearly 100 percent recoverable. In practice, however, the cost in energy and labor to recover all vehicle material often exceeds the value of the materials and offers insignificant value to the environment," Viera said. "We remain focused on achieving the highest economically viable and environmentally sound recovery percentage possible."

Additional material on Ford's commitment to "reduce, reuse and recycle": Fact Sheet | Graphic

# # #

About Ford Motor Company
Ford Motor Company, a global automotive industry leader based in Dearborn, Mich., manufactures or distributes automobiles across six continents. With about 198,000 employees and about 90 plants worldwide, the company's automotive brands include Ford, Lincoln, Mercury and, until its sale, Volvo. The company provides financial services through Ford Motor Credit Company. For more information regarding Ford's products, please visit www.ford.com

I'm reporting this comment as:

Reported comments and users are reviewed by Autoblog staff 24 hours a day, seven days a week to determine whether they violate Community Guideline. Accounts are penalized for Community Guidelines violations and serious or repeated violations can lead to account termination.

    • 1 Second Ago
      • 5 Years Ago
      Good for Ford, good for the environment...
      • 5 Years Ago
      Ford, you better be talking soon about your new highly efficient turbo-diesels if you don't want another bloody nose from VW.
      • 5 Years Ago
      I never really used to turn an eye to Ford a while ago, but they have really cot my attention lately, the new Fusion, the new Edge, the new Taurus, all the new Lincolns and their shnazzy new advertising campaign... Really the one drawback to Ford is Mercury... I haven't heard a peep from them in the longest time... and Lincoln does a good enough job with the vehicles... (Since Mercurys are the same as Fords and Lincolns anyway...)

      Mercury should either go or do something amazing...
      • 4 Years Ago
      Wow that is incredible! Way to go Ford!

      • 5 Years Ago
      Of all the car companies scrambling to generate interest in their brand during this economic downturn, I think Ford is definitely taking the lead with all these green tidbits, new car technology, and their Sync system. Good going Ford!
      • 5 Years Ago
      This is probaly is just another reason Ford is looking more like winner and leader each day. I wathced a show on all the recycled products going into their cars awhile back and thought it was cool and couldnt figure out why others havent done it yet. Could you imagine a Tesla made from recycled cell-phone plastic and charged using wind and solar power? Talk about ultimate green machine lol
      • 5 Years Ago
      Good for the planet and good for ford because recycled materials are often cheaper.
        • 5 Years Ago
        What are the chances those savings get passed on to the consumer? I dont think that much but Oh well still makes you feel good when your driving the ecoboost knowing your helping out the enviro in more ways then one (still waiting for the 2.0 ecoboosted Fusion) FORD!
        • 4 Years Ago
        It is about time that someone starts thinking outside the box... Using recycled parts in cars. What a concept.

      • 4 Years Ago
      If each person and business assists in the recycling of as much material as they possibly can, we reduce our need to import raw materials and help to keep our planet cleaner.