Filed under: Motorsports
Official Unveiling: Audi R10 Le Mans Prototype
It's official - Audi will become the first manufacturer to compete for the overall victory with a diesel engine at
the most famous sportscar race in the world - the 24 hours of Le Mans.
Audi unveiled the new R10, its successor to the brilliant R8, today in Paris. The engine is a marvel - a 5.5-liter,
all-aluminum v12 twin-turbo TDI. It develops 650 hp and more than 1,100 Nm torque - more power than the R8.
The best news, especially for North American motorsports fans? The R10 will make its competition debut at the 12 hours
of Sebring in March. In the picutre above, a smiling Tom Kristensen (a multiple Le Mans winner in the R8) seems pretty
happy with his new ride.
Truly a ground-breaking machine. Full press release after the jump.
Audi R10 world premiere in Paris:
V12 TDI engine produces over 650 hp
First test successfully completed
AUDI AG is once again one step ahead of the opposition: The inventor of TDI will become the worlds first automobile
manufacturer to fight for overall victory with a diesel engine at the famous 24 Hours of Le Mans. The all-new Audi R10,
which was unveiled on Tuesday in Paris, is powered by a totally new 5.5-litre, twelve-cylinder bi-turbo TDI engine,
which is extremely quiet and economical.
The Le Mans Prototype, with over 650 hp and more than 1,100 Newton metres torque, significantly exceeds the power
produced by the majority of previous Audi racing cars including that of its victorious R8 predecessor. Audi ventures
into previously unexplored diesel-engine terrain with the V12 power plant manufactured completely from aluminium. As
with the TFSI technology, which triumphed initially at Le Mans before being adopted for mass-production, Audi customers
should benefit once again from the lessons learnt in motorsport.
With the A8 4.2 TDI quattro, Audi already builds one of the most powerful diesel cars in the world, explained Prof
Dr Martin Winterkorn, Chairman of the Board of Management of AUDI AG, at the R10 presentation in Paris. The Le Mans
project will help our technicians to extract even more from TDI technology. Nowadays, every second Audi is delivered
with a TDI engine. We expect that the percentage of diesel engines will be even larger in the future.
The R10 prototypes V12 power unit, which is equipped with two diesel particle filters, is hardly recognisable as a
diesel thanks to the engines smooth running nature. The TDI engines specialities presented the Audi Sport engineers
with a whole list of challenges. The injection pressure easily exceeds the 1,600 bar achieved in production cars. The
usable power band lies between 3,000 and 5,000 revs per minute an unusually low rev range for a racing engine. The
driver must change gear in the R10 far less often than in the R8 because of the TDI engines favourable torque
curve.
The enormous torque of over 1,100 Newton metres does not only make extreme demands of the R10 transmission system
even the latest generation of engine dynamometers at Audi Sport had to be re-equipped with special gearboxes capable of
withstanding the unusual forces.
Additionally, radical changes to the chassis were also necessary. The Audi R10 has a significantly longer wheel base
than the R8. The overly wide front tyres are, up until now, unique for a Le Mans Prototype. New technologies were also
implemented during the development of the carbon-fibre monocoque. Chassis, engine and gearbox form an extremely rigid,
fully stressed unit.
The R10 project is the biggest challenge ever to have been handed to Audi Sport, said Head of Audi Motorsport Dr
Wolfgang Ullrich. TDI technology has not been pushed to its limits in motorsport yet. We are the first to confront the
challenge. The demands of such a project are accordingly high. Long-term technology partners such as Bosch, Michelin or
Shell support us in our quest. Together we have the chance to write new chapters in the history books of motorsport and
diesel technology.
The new Audi R10 successfully completed its first test at the end of November. An extensive test programme, including
the 12-hour race at Sebring (USA) on 18 March, is scheduled before the 24 Hours of Le Mans on 17/18 June 2006. The
development team from Audi Sport is supported by Reinhold Joests squad, which also performed this task during the R8
project.
[Source: Audi Motorsport]
Reader Comments (Page 1 of 1)
TheChaz 10:50PM (12/18/2005)
Just because I've already taken the time to look it up: 1100Nm = 811 Lb/Ft
Reply
OlivierB 10:50PM (12/18/2005)
Here in Europe we had already seen some Diesel BMW 3 series takeing the lead on some of teh endurance races.
Diesel engines are well suited for endurance races as they tend to be more reliable (less RPM), more economical (Diesel packs 20% more energy per unit of fuel than petrol), more efficient (better conversion of diesel in mechanicial energy than petrol).
As a downside they tend to be heavier than petrol engines because they inherently have much higher compression ratios (typically 20:1 for diesel vs max of 12:1 for petrol) and hence the engines have to be "stronger" to take the charge. With the all aluminium however the weight difference could be minimal.
Low RPM range which means that they have a slower acceleration from a standstill as the car requires more gear changes, however re-acceleration is dramatic with a very flat curve (i.e. max torque numps in around 1500 rpm).
Another drawback of diesels is dark exhaust fumes under charge. In the recent years however, Peugeot has developped a filter which burns exhaust particules with high temperatures. It's awesome.
Mind you, the current 330 D re-accelerates (say from 50 to 70 MPH) HARDER than the M3! It will literally cream the M3.
For me the Hondas are at the other end of the philosophie with low torque, high-reving engines.
Myself I am more enclined to big torque diesels. I am now more found of the BMW 6 cylinder growl then its petrol equivalent. It's that good!
Reply
R8 power 10:50PM (12/18/2005)
The article says it makes 650HP - more than the R8.
This is correct, but only the 2005 model R8 at Le Mans or in LMES.
ACO restricted the R8 to less boost (1.67 bar) and a smaller air restrictor for 2005. This meant that the R8s actually were slower on the Mulsanne Straight than the Corvette C6Rs and the Aston-Martin DBR9s. Seeing the R8s actually draft the Corvettes and Aston-Martins down that straight was very odd. Even odder, the Vettes and A-Ms would pull away from the R8s in the two cicanes in the straight if they R8s weren't very very careful about taking the cicanes. This despite the much lighter weight and lower CG of the R8s. The other LMP900s (Judds) were of course much faster than any of those cars.
In ALMS (US races such as Sebring), the R8s ran without these changes.
So anyway, it's pretty clear that the R8s before 2005 made at least 650HP, likely a lot more.
Reply